use: Dust suction and drain hoses Suction and drain hoses for wear-resistant, wear-resistant, water-repellent, for vacuum or gravel trucks, sand, gravel, cement powder, dry fertilizers, iron ore and abrasives for processing from grains. Note. This hose is not designed for batch processing, for example, for the removal of railway transport. Litho Hydraulics is designed specifically
: T-Bolt Hose Clamps - Hose Fittings: Industrial
Autobahn88 Stainless Steel Hose T-Bolt Clamp, Fit for Hose OD Size = (2.6-2.95 Inch (67-75mm)), for Fuel Pump, Filter, Hose, Plumbing (Pack of 2)
Bolt Clamps -
Bolt Clamps Bolt Clamps 271 items returned Refine Results 0.78" Wide x 0.04" Thick, T-Bolt Hose Clamp - 1.69 to 1.85" Diam, Stainless Steel Band, Housing & Zinc Plated Screw 9/16 to 1-1/16" Hose, 1/2" Wide x 0.6" Thick, Constant Torque Clamp - 9/16 to 1-1/16" Diam, Grade 301 & 410 Stainless Steel Your Price: $5.36 ea.
T Bolt Hose Clamp | eBay
Item Description T-Clamp *2 Material: Stainless Steel Zinc-Coated Stud Band Width: 19mm | 0.75" Band Thickness:0.6mm Fit for 2.25" ID Silicone Hose Size Chosen Of T-Clamp Calculate the hose 2 x 3.5" Staineless Steel T Bolt Clamp Turbo Intake 3-1/2" Silicone Hose Clamp
Gates Hose Clamps | JEGS
300 Series stainless steel screw with deep-slotted 5/16" hex Green Stripe T-Bolt Hose Clamps Designed for high-vibration and large diameter applications (e.g. heavy truck, off-road, industrial)
Clamps, Hose & Tubing -
European Style Hose Clamp 5/16"-5/8" 8mm-16mm Range Norma Torro (European Style) Hose Clamps Unique off-set non-welded design of the housing provides resistance to over-tightening damage to the hose.
Worm Gear Clamps - Hose Clamps - Grainger Industrial Supply
Interlocked Worm Gear Hose Clamp. Use 300 stainless steel T-bolt clamps for a reliable seal on heavy trucks and industrial machinery and equipment. SAE Number 4, Hose Clamp Band Width 1/4 In., Screw Size 5/16 In., Hose Clamp Band Material Stainless Steel, Hose Clamp Screw Material Stainless Steel, Hose Clamp Housing Material Stainless
Tube Fitters Manual | Pipe (Fluid Conveyance) | Stainless
Fig. 16 6-8 Stainless Steel Flexible Tubing Swagelok flexible tubing is designed for use in vacuum or low positive pressure applications. Flexible tubing compensates for misalignment, expansion, and contraction in fabricated systems. It is compressible by at least 20 % and extendable by 50 % of its nominal produced flexible length.
Piping Design and Engineering - 6th Ed - PDF Free Download
eb 95 X 47.5 : Dc 38X 0: 133 g qb 95 X 38 : 3610 bc 38XI9:722 1332 133 4513 0 4513 IJi13 ii" = -:::1 133::::33.9feet I;JJ Mat sB ar point poiDr b b X X: = 699 = 104,850 inch pounds: 104.850: 15,220 Psi (aPProximatelY) ffi 12 5 X 12 Z.++ The tables are also helpful in comparing the relative merits of several tentative piping layouts.
Manual for the Control of Hazardous Material Spills
EPA-600/2-77-227 November 1977 Environmental Protection Technology Series MANUAL FOR THE CONTROL OF HAZARDOUS MATERIAL SPILLS: VOLUME I • Spill Assessment and Water Treatment Techniques Laboratory Office of Research and Development U.S. Environmental Protection Agency Cincinnati, Ohio 45268
tube 0.76 id x 1.00 od x 1.06 tube 0.76 id x 1.00 od x 0.69 tile ind light - blank window, rear cab door tint shut-off 5/8 id hose k clamp t-bolt band 7.25-7.6 od diff cage pair heater assy cyt heater duct pkg cyt 12v pin head 5/16 x 1 plug 1/2-14npt steel sq socket pump, hydraulic 8 gpm
MC800 Series MicroCoat System Operating Manual
Mounting Rod Expansion Mount Extension Rod #7021060: Stainless steel rod 1/2" diameter x 10" long. #7021098: Use with cross clamp to extend valves beyond press window. Rod is 1/2" diameter x 4" long. #7023864: Fits in the press window of four post stamping presses. Includes (2) sets of 1/2" diameter stainless steel rods and mounting hardware.
Plasma Arc Cutting Package - ESAB
5. Clamp the work cable to the workpiece. Be sure the workpiece is connected to an approved earth ground with a properly sized ground cable. Table 3-1. recommended Sizes For Input Conductors and line Fuses Input requirements Input & gnd Fuse Volts Phase amps Conductor Size Cu/aWg amps 08 1 55A 6 80 08 6A/Ph. 6 50 0 1 49A 6 80 0 4A/Ph.